Making EU industry less energy intensive and more competitive

The Strategic Energy Technology Plan (SET Plan) Working Group 6 on Energy Efficiency in Industry is organising a Workshop on “Continuing efforts to make EU industry less energy intensive and more competitive” on 27 and 28 June 2018 in Brussels.

The Implementation Plan of the SET Plan Action 6 on "Continuing efforts to make EU industry less energy intensive and more competitive" was endorsed by the SET Plan Steering Group on 29 September 2017.  It describes the future activities that will contribute to reaching the targets defined earlier in the Declaration of Intent.

The Cooperation Workshop in June aims to contribute to the realisation of the Implementation Plan by enhancing cooperation between national programmes and further developing the activities into concrete projects.

Cooperative model

Country representatives will meet and discuss existing forms of cooperation, not necessarily in the field of energy efficiency in industry, to identify the best cooperation model(s) for the future. The identified cooperation models will then be shared with the full workshop audience in relation to Action 6 priorities.

In addition, parallel brokerage sessions, open to country representatives and stakeholders, will focus on further developing the activities into potential cooperative projects: presenting ideas of projects, looking for possible cross-border cooperation between similar and/or complementary ideas, and identifying specific actors and potential financing sources for collaborative projects.

To ensure effective and efficient workshop, the number of attendees for the workshop will be limited to 150 persons maximum. In particular, stakeholders will be invited to submit "idea(s) for projects" (or draft projects) before the workshop. In the case of over-registration, priority will be given to stakeholders who have submitted a project.

Plan and programme

Details of the Implementation Plan and the Workshop Programme, including its rationale and objectives, who should attend and why, plus practical information on the organisation of the sessions and a preliminary agenda can be found here.

Registration and the call for "Project ideas" is now open, but will close at the end of April. Confirmation of participation will be announced at the end of May.

SusChem Stakeholder 2016: Materials focus

This year’s SusChem stakeholder event takes place on 16 June in Brussels. One of the areas for discussion at the stakeholder event will be Materials. In this blog Anne Chloe Devic (pictured below right), Cefic Innovation Manager responsible for this SusChem priority area, outlines the field, its many areas of innovation for sustainable chemistry and how you can participate in the discussion at #suschem16.

Materials is one of the five SusChem priority areas for innovation. There are at least two European Commission policy areas that relate closely to materials. One is ‘Closing the loop - An EU action plan for the Circular Economy’ and the second is the Energy Union with its Strategic Energy Technology (SET) plan. SusChem has defined its priority areas for research and innovation in materials as materials for energy efficiency, materials for low carbon electricity production, and materials for energy storage.

However, these three application areas remain very wide and SusChem wants to narrow down the priorities in order to maximise impact. Therefore SusChem is looking to engage its stakeholders to support and contribute to refining and defining the top priorities for sustainable chemistry in the materials domain.

In the next few month a SusChem working group, currently being formed, will discuss and propose the priorities that SusChem will put forward for inclusion in future calls of Horizon 2020 (and beyond) and other European and National collaborative research and innovation programmes.

Materials and Energy
The chemical industry is a key solution provider for many value chains and other industry sectors that are aligned with the priorities outlined in the fifth pillar (research and innovation) of the Energy Union.

Sustainable chemistry provides technologies and advanced materials for:

• Enabling the EU to be a world leader in renewable energy. This includes providing advanced materials 
• for sustainable production of renewable electricity, for example new composites for wind turbine blades and materials for photovoltaic technologies that include the recycling of these materials, 
• for energy storage, for example: electrical energy storage - materials for advanced batteries; chemical energy storage - advanced materials and process technologies such as H2 and CO2 based energy carriers via power-to-gas and power-to-liquid technologies; and thermal energy storage - phase change materials or reversible thermochemical reactions.
• Efficient energy conservation solutions to make the future and existing building stock energy neutral. This includes: advanced materials for thermal insulation, efficient lighting, and phase change materials amongst others.
• More sustainable transport systems through the use of lightweight materials as a solution to enable lower carbon transport. This includes innovation in ‘light-weighting’ technologies in terms of both materials and process technologies that can play a vital role to improve fuel efficiency and reduce CO2 emissions in transport. Composite materials, such as fibre reinforced plastics (FRP that can be carbon or glass reinforced) have a significant potential for weight reduction in vehicles. They can offer light weight benefits in comparison to other structural metallic materials, while maintaining high mechanical properties. In addition hybrid materials, combining composites and metals, with appropriate joining technologies, can reduce vehicle weight. Materials development for more fuel efficient tyres and advanced battery technologies are also important.

Materials and the Circular Economy 
The development of innovative advanced materials by the chemical sector is essential to enable a better use of existing resources along the whole life cycle of products and services, and to develop new production and recycling process paths.

The development of materials enabling ‘eco-design’ of products is required to address very demanding requirements in terms of performance in downstream applications, including better recyclability. New technological development of materials is often carried out by the chemical industry in collaboration with its value chain partners to provide improved / desired material characteristics and to enable more recyclable end-use products.

For this design and development process to be effective, sustainability assessment over the whole life cycle of the product needs to be considered. The evaluation of environmental impact should consider all environmental aspects including energy and water.

Stakeholder discussions
A highly interactive debate is expected at the Stakeholder event on 16 June and your questions and expectations on the outcomes for the panel debates, in particular on materials for energy, are welcome in advance.

Registration for the 2016 SusChem Stakeholder event is still open, but will be closing soon. This dedicated registration website includes all the information you will need to attend the event.

You are invited to submit your questions and comments and also your expectations for outcomes as part of the registration process. You can submit your questions and comments when you register and there will also be a link for question submission sent with the registration confirmation email.

#useCO2 News

Carbon dioxide Capture utilisation (CCU) and carbon storage are certainly hot topics in sustainable chemistry and rarely out of the energy news. Now the European Commission’s Strategic Energy Technologies Information System (SETIS) has devoted a whole issue of its online magazine to the topic including contributions from SusChem and SPIRE.

The January 2016 issue of the SETIS Magazine includes some 20 articles highlighting the many projects and activities on carbon capture utilisation and storage in Europe. Amongst the various contributions from industry and academic experts are two from SusChem and the SPIRE PPP:

• ‘Chemical valorisation of CO2 for Europe’ by Sophie Wilmet of Cefic R&I
• ‘Carbon dioxide – turning an enemy into a valuable friend!’ by SPIRE executive director Loredana Ghinea

SusChem closely follows progress in CO2 utilisation and regularly tweets on developments using the #useCO2 hashtag.

European #useCO2 Events
A couple of important #useCO2 conferences are taking place in Europe during 2016.

Carbon Dioxide Catalysis - Zing Conference on 19 22 April 2016 in the Algarve, Portugal
This conference will showcase the latest advances in the catalytic conversion of CO2. The primary aim of the conference is to gather representatives from the academic and industrial communities to exchange information and ideas, and to find mutual ground for developing new and improved catalytic methods.

International Conference on Carbon Dioxide Utilization (ICCDU XIV) on 11-15 September 2016 in Sheffield UK
The ICCDU is the premier scientific conference on CO2 utilisation research and  provides a multi-disciplinary forum on recent innovations in fundamental and applied aspects of carbon dioxide utilization. There are three broad themes and abstracts are welcome in the following areas by 29 February:

• CO2 insertion any processes in-which CO2 is inserted i.e. polymerisation, mineralisation.
• CO2 splitting any process in which CO2 is split, i.e. electrochemistry, plasma, photochemistry.
• Enabling technologies i.e. carbon capture, LCA, CO2 utilisation in the circular economy, hydrogen production for CO2 utilisation, energy integration, whole systems approaches.

SCOT project
The Smart CO2 Transformation (SCOT) project has launched its Vision for Smart CO2 Transformation in Europe, a long-term Vision for CO2 utilisation that puts forward why Europe should make CCU a priority and accelerate the development of #useCO2 technologies.

The report suggests three core reasons why Europe should accelerate the market development
of its CO2 utilisation sector:

• CO2 utilisation can be one of the major growth areas in Europe’s future low-carbon circular economy
• CO2  utilisation can help to facilitate Europe’s energy transition
• CO2 utilisation can contribute to achieving Europe’s aims for decreasing carbon emissions

The project also has two further events:

How to deal with oil price ups and downs: SCOT & CO2Chem Workshop on 23 March 2016 in Frankfurt, Germany
The significant work on CCU in recent years is being jeopardised by the current depressed fossil fuel price. For successful market implementation, it is crucial for CCU technologies to compete economically, thus the low oil prices are a major barrier for the development of CCU technologies. The goal of the workshop is to describe the current situation and to discuss how CCU can develop constantly and safely within these uncertain framework conditions.
http://www.scotproject.org/

CO2 Utilisation as a Strong Catalyst for the European Industrial Renaissance on 29 June 2016 in Brussels
The final conference of the SCOT FP7 project will present the Research and Development and the regulatory needs that SCOT has identified as levers for the development of CO2 Utilisation. The day will be split in two parts; in the morning, the CO2 recycling community will gather key industrial and academic players in order to discuss the Strategic European Research and Innovation Agenda (SERIA) and the next steps necessary to implement the Joint Action Plan.  In the afternoon, discussion will move to European and regional policy makers and what can be done from a policy perspective to allow the industrial deployment of these technologies.

About CO2Chem
The information provided in this blog is supplied by the CO2Chem network that brings together academics, industrialists and policy makers over a wide range of disciplines to consider the utilisation of carbon dioxide as a single carbon chemical feedstock for the production of value added products. Network activities are geared towards the founding of strong cross-disciplinary research clusters that will lead research in this increasingly important area.
A calendar of forthcoming events covering carbon dioxide utilisation (#useCO2) topics can be found on the CO2Chem Website.