'Towards a New SusChem SIRA' Workshop

SusChem stakeholders met on 16 and 17 May in Brussels to work on the next SusChem Strategic Innovation and Research Agenda (SIRA), reflecting on the new opportunities and challenges to be faced in the next European research and innovation framework programme: Horizon Europe. This SusChem SIRA-dedicated workshop brought together members of the SusChem Board, the SusChem NTPs and experts from across Industry, Academia and SMEs, to finalise the technology content of the SusChem SIRA. The SusChem community continued a process that was initiated at theSusChem Stakeholders 2018 meeting, followed by nominations of experts and two consultation rounds. The communication of the new SusChem SIRA is expected at the upcoming 2019 SusChem Stakeholder meeting on 27 November 2019.

SusChem has been working on identifying technology priorities along its three main technology pillars: Advanced Materials, Advanced Processes and enabling Digital technologies. The ‘Towards a New SusChem SIRA’ workshop was a follow up to prior consultation rounds that were initiated after the SusChem2018 Stakeholders meeting. The new SIRA will reflect on the overall strategy and role of Sustainable Chemistry and Industrial Biotechnology in boosting innovation in Europe and tackling global challenges, in the context of Horizon Europe.

On day one, participants focused on four cross-cutting topics of high relevance for SusChem: 'Circular Economy', 'Process Intensification', 'Sustainability Assessment Innovation', and 'Safe -by-design innovation'.

Delegates joined roundtable discussions, moderated by experts, focussing on a specific sub-topic within one of the four areas and considered the current state-of the-art and grand challenges. From that analysis they then selected key priority areas for research and innovation in the timeframe of Horizon Europe. A key output was the likely impact of research and innovation. Horizontal impacts and requirements, such as education and training, were also discussed.

For the Process Intensification session, the sub-topics were: reaction engineering, digitalisation, electrification, modularisation, and materials. In the Safe-by-Design session research and innovation themes relevant to process and materials innovation as well as methodologies towards improved safety and sustainability were discussed. The Circular Economy session looked at biomass valorisation, CO₂ valorisation, waste valorisation, circularity-by-design and water circularity. Finally, the Sustainability Assessment Innovation session discussed methodologies, data, tools and uptake issues to ensure the measurable and sustainable impact of the developed technologies.

SusChem key enabling technologies in Horizon Europe

The second day of the workshop began with a summary of the outcomes of day one, followed by a panel discussion on strategic research priorities for Sustainable Chemistry and Industrial Biotechnology in the context of the transition to Horizon Europe.

Contributions were made by SusChem board members Dr. Jens Rieger of BASF, Dr. François Monnet from Solvay, Dr. Deirdre Black of the Royal Society of Chemistry and Dr. Fernando Moreno of Solutex, with Jürgen Tiedje representing the European Commission DG Research & Innovation. The panel debate was moderated by Dr. Pierre Barthélemy of Cefic and also a member of the SusChem Board.

Jürgen Tiedje opened the discussion with an update on Horizon Europe. He noted that there was a basic agreement between the Commission, Member States and the European Parliament on the framework programme, although the budget is still to be finalised. The Commission is moving ahead with implementation to ensure calls would be available in 2021.

He described the changes in areas relevant to industry in Horizon Europe as “not a revolution, but a big change nonetheless” and he emphasised the need to highlight the impact of any proposed research and innovation calls. In June the Commission will publish strategic plans describing “what do we want to achieve” in Horizon Europe, again with a clear emphasis on increasing impact. A widespread consultation on the document will follow and the plan will be discussed at and finalised after the next EU Research and Innovation Days on 24-26 September 2019. He also noted that the Commission has just published a call for experts to join the new Horizon Europe Mission boards and invited SusChem stakeholders to be involved in all the above-mentioned steps of stakeholder consultation. In general, he thought that the outcome of the SIRA workshop would be an excellent basis for SusChem input to the Horizon Europe debate.

The panel discussed the significant impact of SusChem and the previous SusChem SIRA under Horizon 2020, and how this raised the platform’s ambition for Horizon Europe. The SusChem Board highlighted how this could be achieved through SusChem’s considerable experience as a multi-stakeholder platform and an advisory forum on technology priorities to address EU challenges.

The panel discussion ranged across the role of the European Research Council in the programme, how to support SMEs’ involvement and the role of the SusChem NTPs in achieving this, and Horizon Europe’s aim to provide new open infrastructure such as facilities for innovation testing and demonstration.

The SusChem Board members highlighted the need to make the best use of the collaborative synergies and experience established by SusChem that could be very useful in achieving, for example, a true Circular Economy faster. They also emphasised how both vertical and horizontal technologies will contribute to achieving high-impact goals with digital technology being both enabling and transformative.

Jürgen Tiedje reminded the audience that the last work programme for Horizon 2020 would be published soon and would feature a wide-ranging call on circular economy topics which would emphasise inter-topic connection. “It is important to start to look beyond individual topics to leverage impact,” he concluded.

The final working session was devoted to three parallel sessions in which participants considered gaps and prioritisation for research and innovation topics under the three SusChem technology pillars: Advanced Materials, Advanced Processes and enabling Digital Technologies.

Over the two days of the workshop a considerable number of ideas and initiatives were discussed and captured. Existing input from expert groups and the wider consultation process were reviewed and validated and technology gaps were identified with relevant input suggested. All-in-all an excellent basis for refining and completing the revised SIRA.

Next steps?

SusChem Manager, Dr. Vivi Filippousi from Cefic, thanked all participants and the SusChem team for their hard work and significant contributions to the formulation of the new SIRA and outlined the process going forward.

The input from the SusChem SIRA workshop will be analysed and incorporated in the earlier consultation input. As of June, the technology priorities will be structured into SIRA chapters that will relate to the structure of Horizon Europe (clusters and intervention areas). Targeted involvement of SusChem experts will be used to build the SIRA chapters. Once a full draft is assembled, the text will be reviewed by the SusChem Board and the SusChem NTPs for approval before sharing with all contributors for acknowledgement of the document by their organisation.

An expected communication of the new SusChem SIRA towards Horizon Europe (2021-2027) will take place at the 2019 SusChem Stakeholders meeting on 27 November 2019. Save the date now – and see you there!

You can access a photo gallery with images from the workshop event here.

Help shape the next SusChem SIRA

Do you want to help shape the next SusChem Strategic Innovation and Research Agenda (SIRA)? Then you need to register for the SusChem Workshop ‘Towards a New SusChem SIRA’, which will take place on 16 and 17 May 2019 at Hotel Le Plaza in Brussels, Belgium.

The May event will bring together members of the SusChem Board, the SusChem National Technology Platforms (NTPs) and Research and Innovation experts in a two-day working meeting to help finalise the revised SusChem SIRA that will feed into future technology road maps and calls under the next European Commission Framework Programme (Horizon Europe) and other European innovation initiatives.. 

The participation and contribution of as many SusChem Stakeholders as possible is crucial to ensuring the right priorities and topics are included in the revised SusChem SIRA. 

Sessions and key topics 

On 16 May, four sessions, with a number of round table discussions, will focus on cross-fertilisation topics, helping to define strategic priorities for future sustainable research and innovation activities in chemical sciences. 

The four sessions are: 

• Process Intensification. Sub-topics: reaction engineering, digitalisation, electrification, modularisation, and materials;
• Safe-chemicals-by-design. Sub-topics: R&I themes relevant to process and materials innovation as well as methodologies towards improved safety and sustainability;
• Circular Economy. Sub-topics: biomass valorisation, CO2 valorisation, waste valorisation, circularity-by-design and water circularity); and
• Sustainability Assessment. Sub-topics: methodologies, data, tools and uptake. 

On the second day, 17 May, the event will feature the conclusions on high-level priorities from Day 1, followed by a panel discussion on ‘Strategic Research priorities on Sustainable Chemistry and Industrial Biotech’, between SusChem Board members and European Commission representatives from the Directorate-General for Research & Innovation (DG RTD).

Three parallel sessions will follow to fill remaining gaps for specific technology priorities under Advanced Materials, Advanced Processes and enabling Digital Technologies, accounting for their contribution to Horizon Europe challenges and intervention areas.

A draft agenda for the Workshop can be downloaded here and details of how to register for the event can be found here. 

We look forward to seeing you in Brussels on 16 and 17 May!

BBI JU 2019 Call now open

The BioBased Industries Joint Undertaking (BBI JU) has published its 2019 Call for proposals under Horizon 2020. This sixth call will provide a further EUR 135 million of funding to boost the development of the EU’s biobased industries sector. The call is built around four strategic orientations: Feedstock, Process, Products, and Market uptake and continues the BBI JU’s objective of accelerating the development of new sustainable value chains from biomass feedstock supply via efficient processing, to the acceptance and application of bio-based products in end-markets.

The 2019 call identifier is H2020-BBI-JTI-2019 and contains 21 topic areas previously outlined in the BBI JU Annual Work Plan 2019. This document gives the full texts of the call that include 10 Research and Innovation Actions (RIAs), 7 Innovation Actions (IAs) - specifically 4 Demonstration (DEMO) calls and 4 Flagship (FLAG) calls - and 4 Coordination and Support Actions (CSAs) under the Horizon 2020 Framework Programme.

The deadline for submission of proposals is 4 September 2019, 17:00 CET, with proposal evaluations taking place during October and November and results being sent to applicants hopefully during December 2019.

Proposals to the Call 2019 can be submitted through the Funding and Tender Opportunities Portal - SEDIA (former known as the Participant Portal), the official EU funding communication channel, that gives an extensive overview of all Call information, such as Call documentation, how to get support regarding intellectual property, IT, and partner searches etc.

Via the BBI JU’s Partnering Platform, potential participants and consortia members can create  free, online profiles that enable a better interaction with other potential BBI JU Call applicants.

Applicants interested in receiving professional support or advice at the national level can get in contact with the appropriate member of the BBI network of National Contact Points.

BBI Info Day

On 12 April the BBI JU Info Day 2019 is taking place in the Charlemagne Building, Brussels. Plenary presentations on Europe's biobased sector and the development of the global bioeconomy will be followed by an outline of the BBI JU 2019 Work Programme from Philippe Mengal, Executive Director of the BBI JU. Information will be provided about the BBI JU initiative and all other aspects of the 2019 Call process including details of the proposal submission and evaluation processes.

After lunch, the BBI JU Networking event, will help participants to build their networks and find potential partners for the BBI JU Call for proposals.

And throughout the day, participants will have the opportunity to speak to representatives from BBI JU's founding partners and Member States as well as exchange views with entities in synergy with the BBI JU, including SusChem. The BBI JU's Programme Office staff will also be available to answer questions about the Call process and procedure.

SusChem and ISC3 sign MoU to advance Sustainable Chemistry

The European Technology Platform for Sustainable Chemistry (SusChem) and the International Sustainable Chemistry Collaborative Centre (ISC3) signed a new cooperation agreement to foster their common mission of advancing Sustainable Chemistry at a European and global level at the recent SusChem board meeting on 14 March 2019 in Brussels.

The Memorandum of Understanding (MoU) outlines the role of each organisation and proposes long-term collaboration in the following areas: research agenda development, fostering breakthrough Innovation, education & skills development and stakeholder dialogues on Sustainable Chemistry. Through this agreement, both parties aim to maximise the impact of relevant activities, build on synergies and complementarities, and create added value for their members.

Markus Steilemann, Chairman of the SusChem board (pictured above, left), said:

“The memorandum reflects the commitment of both sides to work together towards advancing sustainable chemistry innovation to address EU and global challenges. In the course of 2019, we look forward to collaborating on the new SusChem Strategic Research and Innovation agenda (SIRA), and on the ISC3-led ‘Global understanding of Sustainable Chemistry’ consultation. Here,  SusChem brings in the European perspective sharing the benefits of our SusChem network of National Technology platforms.”

Friedrich Barth, Managing Director of ISC3 (pictured above, right), said:

“We join forces with SusChem to promote sustainable innovation in the chemical sector, leveraging a multi-stakeholder approach that involves Academia, SMEs, start-ups, the large Industry and society. Working with SusChem means having on board such a European forum, building on existing knowledge and advancing Sustainable Chemistry, not only at a European level but at a global scale, which is our main mission.” 

A key 2019 priority of this agreement is the bilateral input on Research Agendas. 

The new SusChem Strategic Research and Innovation agenda (SIRA), is currently being revised and will be structured in line with the next EU research and innovation framework programme: Horizon Europe (HEU). The SusChem SIRA will also address the impact of Sustainable Chemistry on global challenges, as part of HEU, and therefore the Sustainable Development Goals (SDGs). ISC3 will provide input on all relevant technology priorities, and the potential impact of such innovation in Sustainable Chemistry with regards to global challenges. ISC3 will also provide key input on priorities under education and skills, a horizontal topic that will be covered in the new SusChem SIRA.

SusChem will provide input to the ISC3-led ‘Global understanding in Sustainable Chemistry’ consultation with a strong focus on Europe. SusChem will also involve the SusChem NTP network (17 countries) to provide a national perspective.

About SusChem

SusChem ETP, founded in 2004, is a European Technology Platform, with the main objective of contributing to revitalising research & innovation in Sustainable Chemistry and Industrial Biotechnology in Europe. As a multi-stakeholders networking forum and a technology solutions provider, SusChem works towards advising on technology priorities, at a European level, with a long-term strategic research and innovation agenda (SIRA). Connection to National priorities is achieved via its network of  National Technology platforms. SusChem engages, consults and brings together representatives from larger Industry, SMEs, Universities and research technology organisations – being open to the wider society. SusChem technology focus areas include:  Advanced Materials, Advanced Processes, Catalysis, enabling Digital technologies as well as Horizontal topics.

About ISC3

ISC3, founded in 2017, was established by the German Federal Ministry for the Environment, Nature Conservation and Nuclear Safety (BMU) and the German Environment Agency (UBA). ISC3 has a structure supported by a Research & Education Hub (Leuphana University, Lüneburg) and an Innovation Hub (DECHEMA, Frankfurt) with the aim to also establish regional hubs outside of Europe. It is a globally acting institution, a multi-stakeholder platform and think tank that engages with the private sector, civil society and politics to contribute to international chemicals policies and the formation of a global network for collaboration, innovation and education on Sustainable Chemistry. Activities to achieve such objectives are: dialogues amongst stakeholders, building on a global start-up service and funding, developing a Sustainable Chemistry curriculum, and also working towards a research agenda outlining a common understanding on Sustainable Chemistry, sustainability assessment and cross-sectorial topics.

Both platforms share the intent of contributing to a more sustainable world and a circular economy, and to the transformation of the chemical sector towards sustainable chemistry, responding to global challenges.

Horizon Europe on track: EU institutions reach political agreement

On Wednesday 20 March 2019, the European Council and Parliament reached a provisional agreement on Horizon Europe. This political agreement, under the current Romanian Presidency of the Council of the EU, puts the EU institutions on track for a timely launch of Europe’s most ambitious Research and Innovation programme to date.

SusChem welcomes this political deal and fully supports the central role given to the innovative and enabling role of industry and sustainable chemistry in Horizon Europe.

Sustainable chemistry provides the building blocks for many of the Key Enabling Technologies and is a key solution provider for societal and UN sustainability goal challenges.

SusChem is committed to ensuring that Sustainable Chemistry technology priorities are fully considered in the ‘Global Challenges & European Industrial Competitiveness’ pillar of the new programme as well as the Public-Private-Partnership programmes and R&I Missions.

Dialogue and consultation with SusChem Stakeholders is already underway for the revision of technology priorities covered under the SusChem Strategic Innovation and Research Agenda (SIRA), which will serve as its input into Horizon Europe.

For a more detailed analysis of the deal please read this Science Business article.

Choose LIFE!

Apply now for LIFE Funding! The LIFE programme is the EU’s funding instrument for the environment and climate action. LIFE contributes to the implementation, updating and development of EU environmental and climate policy and laws by co-financing projects with European added value. Since its creation in 1992, LIFE has been through a number of different funding periods. The current funding period 2014-2020 has a budget of EUR 3.4 billion and the 2019 LIFE Call for project proposals will be launched at the beginning of April and published on the LIFE Calls website.

To help potential project partners to prepare for the 2019 call the European Commission is organising an Information & Networking Day on the 2019 LIFE call for project proposals on 30 April in Brussels - #EULife19 - at the Charlemagne Building. The event is open to potential applicants presenting project proposals on green technology, nature protection and climate action and registration is open now.

Participants will be invited to a morning information session on the 2019 LIFE call, covering the significant changes to the programme compared to previous years.

The afternoon will be dedicated to networking with fellow participants to share experience, match with potential new partners and meet representatives of the LIFE programme from the European Commission.

The main topics in the 2019 call will cover:

• Environmental technologies and solutions including water, waste, air quality, soil, forest, health
• Climate change adaptation
• Climate change mitigation
• Nature conservation and biodiversity
• Climate and environmental governance and information initiatives

The agenda

The #EULife19 event will open with a review of the policy drivers of the LIFE programme led by Julien Guerrier, Director of EASME (the European Commission's Executive Agency for SMEs) before the 2019 programme call for action grants: priorities and novelties will be outlined.

There will be an opportunity for questions on the programme calls before a session on tips for a successful application.

After lunch an afternoon of  networking  and consortium building is foreseen with participants interested in applying for LIFE funding having the chance to find potential project partners or seek advice from EASME experts and National Contact Points in one-to-one meetings.

Why should you participate?

• To find and meet potential partners for your next LIFE project
• Take the chance to meet experts from the EASME)
• To get advice from LIFE National Contact Points

Register now! Registration is open until 25 April 2019.

SPIRE moves to build new R&I road map with new structure

On Monday 4 February the SPIRE PPP celebrated five years of hard work in which it has seen the launch of 89 projects with a combined budget of some EUR 900 million. The A.SPIRE General Assembly meeting elected Pierre Joris, a board member of a number of international process and chemical companies and previously a senior manager at Solvay, as the new Chairman of the SPIRE Board. Pierre takes over from Daniel Gauthier who had completed his two-year term as Chair. Pierre (right) and Daniel (left) are pictured below with SPIRE Executive Director Angels Orduña at the SPIRE celebration.

At the General Assembly SPIRE announced a range of changes required to translate its SPIRE 2050 Vision, released towards the end of 2018, into concrete research and innovation proposals through the development and publication of a SPIRE 2050 research and innovation road map.

The SPIRE 2050 Vision has been strongly endorsed by SPIRE members, stakeholders and the PPP’s partners at the European Commission and SPIRE now aims to have a solid plan to achieve the implementation of this ambitious vision through the forthcoming Horizon Europe programme and beyond.

The process of building the road map is now beginning and will kick-off officially in March with the aim of achieving a first draft during the Summer and finalising the document by November 2019.

SusChem will contribute to the formulation of the road map through work on its own new Strategic Innovation and Research Agenda, in particular in areas such as process technologies, industrial symbiosis and digitalisation, where SPIRE calls could be a channel to the realisation of projects.

New working groups

In order to facilitate the development of the new road map the A.SPIRE Board of Directors and its Industrial Research and Innovation Advisory Group (IRIAG) has initiated the setting up of seven new SPIRE Working Groups (WGs).

The seven working groups are:

• G1 - Energy Mix
• G2 - Electrification of Industrial Processes
• G3 - Use of Hydrogen
• G4 - Capture and Use of CO2
• G5 - Resource and Process Efficiency (and Flexibility)
• G6 - Industrial and Urban Symbiosis
• G7 – Digital (This WG was already established in autumn 2018)

The current SPIRE WGs (FEED, WASTE, PROCESS and APPLICATIONS.) will no longer be active, however the Advocacy group (aka the Outreach group) will be (re)activated.

A Steering Group will provide strategic guidance and manage the structure of the road map to ensure coherence with SPIRE 2050 Vision. In addition, a consulting company will be selected by A.SPIRE in early 2019 to support the WGs in the formulation of the road map.

WG members required

To populate the new Working Groups, SPIRE is calling for experts from its member organisations to get involved! Two types of expert input are required:

• Technical Experts to provide expertise in the topics addressed by the WGs. In addition, expertise in supply-chain structures and in the upstream and/or downstream related sectors is needed, in order to ensure an integrated approach and consider the wider trends and developments on related EU policies (e.g. Industry, Climate Change and Circular Economy).
• Specialists to provide strategic guidance and input, e.g. experts from companies or research organisations that hold positions to lead implementation strategies in the WG topic.

The new road map will provide an outlook up to 2050, divided into two parts: firstly, a more detailed part that will look into the investments required to reach market deployment within the time line of Horizon Europe, and then up to 2030; and secondly, a less detailed part that presents the plans of the process industries up to 2050.

After the road map exercise, the SPIRE WGs will remain active for the development of the Work Programmes under Horizon Europe.

Five year perspective

At the SPIRE celebration, the former Chair of A.SPIRE, Dr Klaus Sommer, delivered a video presentation outlining the origins of SPIRE, what the PPP has been achieved so far and what the future holds.

SusChem wishes you a successful 2019!

Dear colleagues and members of the SusChem community,

The past year showed us once again the enormous challenges and changes that our world and our industry have to cope with, whilst striving to achieve sustainable development. An extended summer across Europe reminded me and many of us that CO2 emissions are still on the rise; and the issue of plastics waste became more urgent on the political agenda.

Identifying solutions to global challenges like these is achieved via science and technology – and through collaboration. This is exactly the purpose of SusChem, and I think in 2018 we made further progress in sharing a ‘European voice’ on research and innovation priorities in Sustainable Chemistry and Industrial Biotech.

One highlight was our response to Horizon Europe, the ambitious research and innovation programme that the European Commission is forging to succeed Horizon 2020.  At our annual stakeholders event in June, the potential of the contribution of SusChem and Key Enabling Technologies (KETs) under Horizon Europe was highlighted. And we initiated our consultation to build a new SusChem Strategic Innovation and Research Agenda (SIRA). I am sure the new SIRA will be a solid base for advising the European Commission on future technology priorities for Horizon Europe. Delivery of a final draft is planned in the course of 2019 – a major task for next year.

Looking back on 2018, I also well remember our brokerage event in October which was supported by keynote speakers from the Commission and also the disruptive innovation community. The event brought together some 200 European innovators to form strong consortia under open Horizon 2020 calls – a really impressive number! Also the number of national technology platforms (NTPs) rose in 2018 with the accession of Bulgaria, Finland and Sweden, so that our community now comprises 17 NTPs across Europe. 

2018 also saw SusChem making significant contributions to the innovation discussion in Europe. Our extended ‘Key Enabling Technologies in Horizon Europe’ paper was published in February, while two new white papers gave insight and recommendations on recycling of polymer composites and battery energy storage. And most recently, ‘SusChem Plastics Strategic Research and Innovation Agenda in a Circular Economy’ was published with contributions from across the full plastics value chain, as a contribution to the implementation of the EU Plastics strategy.

So 2018 was really impactful. Our key focus for 2019 will be to build on SusChem’s role as a multi-stakeholder advisory forum engaging with both academia and industry. Together we can provide a vision and direction on innovation and technology priorities in Sustainable Chemistry and industrial biotechnology to ensure the success of Horizon Europe. We therefore invite you to join us in formulating together the new SusChem SIRA!

On behalf of the SusChem Board and the SusChem secretariat, I would like to thank you all very much for your continuing commitment to our platform and activities. I wish you a relaxing Christmas break and a healthy, happy and “sustainable” New Year. We look forward to working with you on new SusChem inspired initiatives over the next 12 months!

Best wishes,




Dr Markus Steilemann
Chairman of the SusChem Board

REE4EU Pilot Plant success

The SusChem-supported Horizon 2020 project REE4EU has successfully demonstrated at a pilot scale a closed-loop permanent magnet recycling process for the first time in Europe. The REE4EU pilot has successfully treated several tons of in-process wastes and end-of-life magnetic products containing rare earth elements, resulting in the recovery of almost hundred kilos of rare earth alloys. The alloy will be reused in the manufacturing of permanent magnet products, thereby closing the materials loop!

The successful recycling of permanent magnet waste is a major result for the REE4EU SPIRE project whose full title is: Integrated High Temperature Electrolysis (HTE) and Ion Liquid Extraction (ILE) for a Strong and Independent European Rare Earth Elements Supply Chain.

Rare earth elements (REEs) are the seventeen chemical elements including the lanthanides, Scandium and Yttrium that are key-enablers of sustainable technologies. They are used in hybrid electric vehicles, wind turbines, and highly efficient electric motors. Currently European industries are highly reliant on imports of these valuable and rare materials. Recycling the elements from REE-containing waste streams could constitute an important secondary source of the materials for Europe.

A recent study estimated the global trade in REE-containing products in 2010 is around EUR 1.5 trillion, or 13% of global trade. However, only 1% of REE waste is being recovered as no adequate process is currently available. REE4EU’s success could open-up a brand-new route to recover process wastes from permanent magnet production.

Pilot demo

During the third year of this four-year project that started in October 2015, work has focused on constructing and running the REE4EU's pilot units: the high temperature electrolysis (HTE) and ionic liquid extraction (ILE) units. The technology has now been demonstrated at pre-industrial scale using permanent magnet wastes.

Enough waste material (in-process waste and end-of-life magnets) has been treated to obtain enough rare earth alloy (REA) to run a 600 kg batch of strip cast rare earth master alloy (REMA) and output material from the HTE pilot cell has been used to manufacture permanent magnets in a laboratory line.

The quality of both the REMA input and the permanent magnet output obtained in terms of magnetic properties and chemical composition show that the magnets prepared have the same properties as magnets from mass production using virgin materials. This validates the REE4EU technology to obtain REA for permanent magnet production using magnet waste materials.

The two-step process (ILE then HTE) has been optimised for direct REA production, suitable for REMA to be used in permanent magnet manufacturing. In this way, a complete closed-loop permanent magnet recycling has been demonstrated at a pre-industrial scale using less steps than conventional methods currently carried out in China.

The process and its advantages are explained in this REE4EU video.

Next steps

In the next few months, the REA obtained in the HTE unit will be used to manufacture REMA for permanent magnets in a real magnet production line and benchmarked against magnets produced using virgin materials.

Data collection and modelling activities on permanent magnet waste recycling routes have been carried out and these results will be used to eco-design the recycling chain and to compare it to the conventional supply route of REA currently used for permanent magnet production.

For more information on the REE4EU processes visit their website.

What is the value of Industrial Water?

At the end of November SusChem and the European Water Technology Platform (WssTP) joined forces to present ‘The Value of Industry Water’ at Dechema’s Industrial Water 2018 conference in Frankfurt. The conference was attended by around 150 participants, mostly from Europe but with international representations from China, India, South America and the US, all active and interested in Industry Water Innovation. The conference was supported by SusChem, WssTP and SPIRE.

Water is essential for life. As the world’s population grows and the effects of climate change become apparent the demand for water will increase. And too many people around the world still do not have access to clean water or adequate sanitation. The Industrial Water 2018 conference on 27-29 November sought to highlight today's challenges in industrial water management and discuss the new strategies, developments and technologies that can make industrial water use more efficient.

The Industrial Water conference and exhibition is a biennial platform that addresses all relevant topics along the industrial water value chains: from raw water to waste water treatment; from sensors to digitisation in industrial water management; from alternative water resources to zero liquid discharge and integrated management.

The contribution from SusChem and WssTP was presented by Henk Pool from Cefic during the Digitalisation in Industrial Water Management session of the conference on the morning of 28 November.

Multiple waters
The paper, jointly authored with Durk Krol and Andrea Rubini from WssTP, was entitled ‘The Value of Industry Water: Integrated multiple waters, Digitally Connected and Smartly Managed’ and focused on the new ‘Multiple Waters’ Governance model and how Digital Waters enable a totally different, bottom-up and multi-stakeholder approach.

The basis for the paper stems from joint workshops organised by SusChem and WssTP to identify critical innovations in the context of an Industry Water transition from Single Use to Integrated Management.

The concept of Multiple Waters entails the employment of different water sources and qualities (such as fresh ground and surface water, rainwater, brackish water, saline water, brines, grey water, black water, recycled water) for various purposes by multiple users. The Multiple Waters concept targets the right water for the right purpose to the right users in a synergetic combination of centralised and decentralised water treatment. Water use can then be optimised based on the circularity principle for water such as cascading, reuse or recycling, while enacting new economic mechanisms and models based on the true value of water.

Value drives innovation
Considering Industrial Water management and the true Value of Water leads to the identification of industry innovation needs, which are driven by four factors:

1. Sensor Networks: Sensor development provides a unique opportunity for enhancing the Value of Water. Advanced sensor development is required to ensure continuous understanding and control of water quality. Handling of dynamic water systems requires advanced sensors. Full implementation, reliable operation costs and maintenance are important considerations.

2. Big Data: Identifying the Value of Water system in terms of the data that it generates and creates is central to its economic value. The creation of a resilient basis for cyber security and privacy legislation is necessary, as no holistic overview currently exists in the sector. Links between data silos and pockets of data should be established and prioritised.

3. Modelling and Analysis: Many models for enhancing water management exist in academia or within other research organisations. However, these methodologies need to be brought into context before moving to the next (pilot) phase. It is necessary to identify models and tailor them to the requirements of users in order to develop more efficient water systems while observing the interactions and implications.

4. Smart Governance: Smart governance models vary from region to region. The selection process for an appropriate governance design requires extensive consideration. Education and communication are crucial for its successful understanding and implementation.

The presentation addressed the above factors in detail and built connections between them.

“A balanced combination of innovation across all the factors will enhance the true Value of Water and therefore drive the industry water transition from single use to integrated management,” Henk Pool concluded.

Water efficiency
On 30 November an additional workshop on increasing water and energy efficiency in process industry took place looking at relevant tools, technologies and concepts. The workshop was jointly organised by the EU-funded Horizon 2020 projects WaterWatt and INSPIREWATER – a SPIRE project. The workshop included a number of case studies from the steel and the chemical industry regarding water and energy efficiency measures. Participants were also introduced to the recently developed online tool for evaluating energy efficiency (E3 Platform) and got the opportunity to test the tool during the workshop.

New Plastics SIRA shows path to circularity

In response to the European Commission's recent Plastics Strategy, SusChem and its partners have issued a new report outlining a 'Plastics Strategic Research and Innovation Agenda in a Circular Economy'. This report identifies the challenges to plastics circularity and defines the types of solutions needed to address them. Future research is required in three main areas: Circularity by design, recycling and alternative feedstock.

Commenting on the release of the report, SusChem Chairman and Covestro CEO Dr. Markus Steilemann said:

“The Plastics industry is committed to increase the resource efficiency of its production processes and to face the challenge of closing the circularity loop. The new Research and Innovation Agenda gives fresh impetus on the strongest way to drive progress along plastics value chains by means of collaboration.”

Analysis

The analysis from this new report has helped to identify priorities, projects and the level of investment needed to achieve full circularity of plastics. SusChem and its partners – Cefic, PlasticsEurope, European Plastics Converters (EuPC) and the European Composites, Plastics and Polymer Processing Platform (ECP4) – will use this report as their main input to EU innovation policy on the circularity of plastics.

It is hoped that this document will inspire an increase in the number of collaborative projects as well as increasing European and member states support for a full implementation of the solutions proposed.

The document was developed using input from experts involved in the plastics value chain; principally from SusChem, the European Chemical Industry Council (Cefic), the European Composites, Plastics and Polymer Processing Platform (ECP4), the European Plastics Converters (EuPC), and PlasticsEurope.

You can download the full report here.

EU plastics sector

There are around 60 000 companies in the European plastic industry, most of them SMEs, employing over 1.5 million people and generating a turnover close to EUR 350 billion in 2016.

Thanks to their versatility and high resource efficiency, plastics have enabled innovation in many other sectors allowing the development of products and solutions in strategic areas (e.g., higher protection in packaging, insulation in building & construction, lightweight for transportation, societal wellbeing brought by renewable energy and medical devices) that could not exist today without these materials. A full plastics circularity has the potential to contribute to a significant reduction in greenhouse gas emissions, resource efficiency and job creation (European Circular Economy objectives).

Report partners

The European Chemical Industry Council - Cefic is a committed partner to EU policymakers, facilitating dialogue with industry and sharing broad-based expertise. Cefic represents large, medium and small chemical companies across Europe, which directly provide 1.2 million jobs and account for 14.7% of world chemical production. Based in Brussels since its founding in 1972, Cefic interacts on behalf of its members with international and EU institutions, non-governmental organisations, the international media, and other stakeholders.

PlasticsEurope is one of the leading European trade associations with centres in Brussels, Frankfurt, London, Madrid, Milan and Paris. The association networks with European and national plastics associations and has more than 100 member companies that produce over 90% of all polymers across the EU28 member states plus Norway, Switzerland and Turkey. 

European Plastics Converters (EuPC) is the EU-level trade association, based in Brussels, representing more than 50 000 companies in Europe, which produce over 50 million tonnes of plastic products every year. Plastics converters (sometimes called "Processors") are the heart of the plastics industry. They manufacture plastics semi-finished and finished products for an extremely wide range of industrial and consumer markets - the automotive electrical and electronic, packaging, construction and healthcare industries, to name but a few. 

The European Composites, Plastics and Polymer Processing Platform (ECP4) is an industry-driven collaboration that unites 25 members from 13 countries amongst the top-level European research institutions, regional plastic clusters, and EU-level industrial organisations of plastics and composites converters. ECP4 brings innovation partners together to identify opportunities for collaborative research.

VERAM delivers

The SusChem supported Horizon2020 project VERAM (Vision and Roadmap for European Raw Materials) brought together diverse stakeholders – including five European Technology Platforms (ETPs): Sustainable Mineral Resources, Forest, Construction, Sustainable Chemistry and Advanced Materials – to produce a medium-term (2030) Vision and a longer-term (2050) Strategic Research and Innovation Roadmap for raw materials. VERAM is now completed and its public project deliverables are available to download.

Demographic changes, such as population growth in developing countries and an ageing population in developed countries, coupled with increasing standards of living and urbanisation trends will foster a greater demand for products and applications linked to human well-being, health, hygiene and sustainability. As a consequence, the worldwide demand for raw materials is expected to increase while global resources and land become scarce. A shift towards a more resource-efficient, circular economy and sustainable development is essential. 

Europe is confronted with many challenges along the entire raw materials value chain. Yet, innovation in raw materials value chains remains untapped despite the sector’s great potential.  A more coordinated approach towards raw materials management will help reduce external supply dependency and lead to an efficient use of resources.

To achieve these goals, a long-term vision and roadmap to 2050 could help tap the full potential of raw materials supply and use in Europe and boost the innovation capacity of the sector, turning it into a strong, sustainable pillar of the EU economy and an attractive industry, whilst addressing societal and environmental challenges and increasing benefits for society. This is where VERAM came in.

Key to success

“The key to the success of VERAM was the strong partnership that was forged through the project, linking diverse ETPs, value chains, industry sectors and academia,” commented Patrick Wall, VERAM’s project coordinator from the European Technology Platform on Sustainable Mineral Resources (ETP SMR).

“To address the challenges in the raw materials supply chain, VERAM initiated communication and dialogue between the different raw materials sectors, stakeholders (including civil society organisations) and all parts of the value chain to pool experience and knowledge and build the VERAM Vision and Roadmap for Raw Materials,” Mr. Wall continued.

Henk Pool, Innovation Manager at CEFIC, a partner in the VERAM project consortium said: “Predicting the future is a significant challenge, especially in a world that is experiencing rapid change, including accelerators of change such as digitalisation, however we can be certain that there will still be a significant need for raw materials in 2050! And VERAM has helped us understand what will be required and the critical need for innovation to ensure this need can be met.”

Deliverables to download

A range of deliverables across the project’s five work packages are now publicly accessible. They include:

Work package 1: Management and coordination

• Results of the feasibility study to establish a R&I Raw Materials Stakeholder Portal

Work package 2: Dissemination and communication

• Project website design and initial promotion materials (logo, templates)
• Clustering with ongoing initiatives (EIT RM; clusters; EU projects on RM, …)
• Final Conference

Work package 3: Defining and exploring the playing field

• Report on the raw materials research and innovation network: the relevant players and their roles
• Report on the RM research & innovation funding and projects: relevant R & I topics in the EU and abroad, strengths and weaknesses of current EU and MS funding landscape
• Report on future societal challenges and the corresponding needs of global markets and EU industries
• Report on the challenge ahead: the gap between future EU industrial needs and current research and innovation funding
• Web based information handling portal

Work package 4: Creating a vision 2030 and 2050 for raw materials

• Report on economic outlook and raw material needs for 2050
• Report on Raw material research and innovation vision for 2050
• Report on innovation and capacity building needs across the EU economy till 2050

Work package 5: Creating the raw materials roadmap 2050

• RM Research Roadmap drafts
• RM Research Roadmap and recommendations

KETs Impact: The SUNLIQUID® and LIGNOFLAG Projects

The recent SusChem White paper ‘Impact: Key Enabling Technologies (KETs) in Horizon Europe’ included a number of success stories highlighting publicly funded innovation involving KETs and the SusChem News blog is featuring a selection of these fruitful 'SusChem inspired' initiatives.

KETs are technologies selected for their ability to address global challenges, support the development of new products, and stimulate economic growth.

Sustainable chemistry is essential to the technological advance of KETs including advanced materials, advanced manufacturing technologies, industrial biotechnology, micro and nanoelectronics, nanotechnology and photonics. SusChem's key enabling technologies provide the critical building blocks for the solutions needed to achieve a sustainable low carbon circular economy. You can find out more here.

Our second highlighted success story is built around the BBI JU Horizon 2020 project LINGOFLAG that aims to optimise the efficiency and increase the capacity of Clariant’s unique flagship plant for the production of cellulosic ethanol from agricultural residues (such as straw) based on its sunliquid® technology as a significant step towards a biobased, circular economy in Europe.

Agricultural residues into biobased chemicals

Innovative process technology reduces Green House Gas (GHG) emissions

The realisation of a first-of-its-kind flagship production plant using a new technology is always a high-risk project with significant higher costs compared to subsequent plants. The support through public-private funded projects helps to de-risk the investment in a production plant and leverages private capital in this important industry sector.

Clariant’s sunliquid® process converts lignocellulosic agricultural residues, such as cereal straw, into cellulosic ethanol or other biobased chemicals in a way that is highly efficient, economic, energy-neutral and sustainable. Sunliquid® contributes to the political objectives of reducing GHG emissions in the transport sector, to support the transformation from a fossil-based economy to a biobased, circular economy through creation of green jobs, especially in rural areas, mobilisation of currently underutilised agricultural residues, boosts to local economies and creation of additional business opportunities, and creation of a sustainable and competitive source of domestic renewable energy for the EU. Sunliquid® is a biotechnological process and hence contributes to the KET biotechnology.

How was the breakthrough innovation achieved?

The sunliquid® process was developed by Clariant for more than 10 years to overcome major technological hurdles like the need for high yields, low energy consumption, and a stable and economic process of cellulosic ethanol production. During this time the process was developed from Technology Readiness level (TRL) 4 to TRL 8. The maturity of the process was developed in pilot plant scale in Munich, Germany. As a subsequent step within the process development the technology was further up-scaled to demonstration scale with Clariant’s pre-commercial plant in Straubing, Germany. This plant is operational since June 2012 and successfully demonstrated the process in an operational and integrated environment. Clariant’s sunliquid® technology is now ready for a flagship production plant for lignocellulosic ethanol.

Various development steps and parts of the sunliquid® process received and still receive funding. The funded projects on Bavarian, National and European level as well the partnership with the region Straubing enabled Clariant to develop the technology and still supports the proof of techno-economic viability of the sunliquid® technology at commercial scale.

Impact

Clariant is investing in a new commercial-scale plant for the production of cellulosic ethanol made from agricultural residues, based on the sunliquid® technology, in the southwestern part of Romania. This undertaking will have the following impact:

• Reduction of greenhouse gas emissions of up to 95%
• Clariant investment in southwestern Romania of approx. EUR 150 million
• Number of jobs: 80 direct and 300 indirect. 800–900 during construction phase in an underdeveloped region of the country with unemployment rates of 20%
• Additional income for farmers and local businesses: >EUR 20 million
• Additional tax generated in the region: >EUR 1 million annually for the next 20 years
• Regional Development: Industrial plant using agricultural residue as feedstock in a strong agricultural economy along with energy integration of actors along the whole value chain

More information
SUNLIQUID - Large scale demonstration plant for the production of cellulosic ethanol (FP7 GA number 322386)

LIGNOFLAG - Commercial flagship plant for bioethanol production (Horizon 2020/ BBI JU GA number 709606)

Read the SusChem White Paper ‘Impact: Key Enabling Technologies (KETs) in Horizon Europe’

#suschem2018 starts defining technology priorities for Horizon Europe

On 20 June, at its 16th Annual Stakeholder event (#suschem2018) in Brussels, the European Technology Platform for Sustainable Chemistry (SusChem) started the collaborative process to build a new Strategic Innovation and Research Agenda (SIRA) for Horizon Europe.

The SusChem stakeholder event was a great opportunity to underline SusChem’s role and vision under Horizon Europe. The keynote speech given by the European Commission presented the novel elements and opportunities in the new framework programme (2021-2027). Focusing on priorities for advanced materials, advanced processes and associated digital technologies, the initial task of identifying technology priorities was initiated. The SusChem innovation ecosystem was also boosted by the addition of three new National Technology Platforms (Bulgaria, Finland and Sweden). The day was completed with a lively and provocative panel discussion on how to leverage the strength of the innovation ecosystem as a whole to boost the competitive position of Europe in Research and Innovation.

An opening keynote speech by Markus Steilemann, CEO of Covestro and SusChem chairman (pictured above), described the role of SusChem as: “responding to global challenges and EU priorities” by providing “innovation solutions based on sustainable chemistry.”

He also emphasised SusChem’s significant role in enabling a highly collaborative research and innovation environment by bringing together industry including small and medium-sized enterprises, academia and Research and Technology Organisations (RTOs) at a European level whilst connecting with regional and national programmes through its expanding network of National Technology Platforms (NTPs).

Steilemann called on all SusChem stakeholders to voice their priorities and help define the technology priorities for the next SusChem SIRA. The next SIRA will be a solid base for advising the European Commission on high-impact missions and priorities for Horizon Europe. SusChem will remain an active and engaged partner of the European Commission.

“We have demonstrated that SusChem enables the development of sustainable technologies that lead to sustainable products,” he concluded.

Horizon Europe

A second keynote speech was given by Ms. Signe Ratso, Deputy Director General at the Commission’s DG Research & Innovation (pictured below), focusing on the proposal for the next Research Framework programme: Horizon Europe.

Ratso sees Horizon Europe as our chance to shape the future: “Europe has world-class research and strong industries – our knowledge and skills are our main resources – but Europe fails to transform leadership into leadership in innovation and entrepreneurship.” Horizon Europe – although an “evolution rather than revolution” aimed to address that.

Key novelties in the programme proposal were the increased support for breakthrough innovation (via mission-oriented research), the ambition to create more impact, and a more strengthened international cooperation. Horizon Europe also aims to reinforce openness.

In terms of the ‘missions’ concept, Ratso underlined the need for missions to connect with citizens and be “bold and inspirational” while having measurable goals that could be achievable in around a ten-year time frame. Activities in missions should be across-sectors, involve actors from different disciplines and work along value chains. She invited all partners to work together on further shaping Horizon’s Europe missions and looked forward to SusChem’s input to the programme.

Defining technology priorities

One of the main focus points of the event was to start the consultation process to build the new SusChem Strategic Innovation and Research Agenda (SIRA). Two parallel breakout sessions covered advanced materials and advanced process technologies. Both sessions considered the role of Digital Technologies as an enabler for designing better performing materials and processes. More specifically, the sessions initiated the debate on technology priorities and looked to identify experts who could contribute to the development of the next SIRA.

The materials session focused on three thematic clusters: circularity for materials; energy storage, production and efficiency; and functionality and performance. The advanced process technology themes were: digital technologies for process design and control, waste as feedstock, fossil-based feedstock, biobased feedstock, and CO2 as feedstock. The sessions identified technology clusters that require further attention as well as the following broad issue areas: sustainability assessment; skills, consumer awareness, and education and training.

All the input gathered at #suschem2018 will be assessed and processed further to form the basis of the new SIRA together with additional expert input from SusChem working groups that are currently being set-up.

Expanding ecosystem

The SusChem National Technology Platforms discussed how they approached stakeholder engagement in their countries and gave examples of the successful formation of consortia and transnational collaborations. Moreover, they reflected on how to enhance their role even further together with the SusChem ETP. Representatives from nine of SusChem’s 17 NTPs were involved in the debate moderated by Susanne Coles (SusChem UK).

The session was also a great opportunity to present the three new national platforms – Bulgaria, Finland and Sweden - that were approved for membership by the SusChem board the day before the event. SusChem also welcomed Andreas Falk (SusChem Austria) as the new Chair of the NTPs network for the following year.

#suschem2018 concluded with a wide-ranging debate, led by Marco Mensink Director General of Cefic, which explored the priorities required to maintain Europe’s leading role in global innovation and how the structure of Horizon Europe can mobilise our innovation ecosystems. The panel included Peter Dröll, Director Industrial Technologies at Commission’s DG Research & Innovation, Prof. Ferdi Schüth, Vice-President of the Max-Planck-Society, Kateřina Šebková, Director of the Stockholm Regional Centre for Central and Eastern Europe, Martin Stephan, Deputy CEO of CARBIOS, and Olaf Wachsen, Head of Group Process Technology, Clariant.

Panel members called for the continuation of enduring partnerships and collaborations created through programmes like Horizon 2020, which were considered more valuable than the funding per se. They suggested that Horizon Europe could be seen as a part of the EU’s vision to reindustrialise Europe.  The continuation of Key Enabling Technologies (KETs) and the need to bring together all of the bright minds of Europe, were other prominent points stressed by the panel, no country can bring about change alone.

Future path

#suschem2018 has successfully set the course to develop the next SusChem SIRA. It has continued the vibrant dialogue with our platform’s stakeholders and the European Commission on future orientations for sustainable chemistry research and innovation to enable the development of technologies and that will meet EU global challenges.

The process continues at the next major SusChem event: our 2018 Brokerage event that will be held on 23 October 2018 at Hotel Le Plaza, Brussels and will cover later sustainable chemistry relevant calls for Horizon 2020. Save the date!

#suschem2018: Defining technology priorities for sustainable growth in Europe

Today (20 June, 2018() the European Technology Platform for Sustainable Chemistry (SusChem) holds its annual Stakeholder event (#suschem2018) in Brussels. The event brings together global audiences, senior players from the chemical and biotechnology industries, academia, research and technology organisations (RTOs) and EU institutions to address common challenges and discuss priorities crucial to the sustainability of the European chemical and biotechnology innovation sectors. 

The theme for #suschem2018 is ‘The Future of Research & Innovation in Europe: Defining Technology Priorities for Sustainable Growth’.

This year’s opening keynote speeches will be presented by SusChem Chairman Dr. Markus Steilemann, Chief Executive Officer of Covestro, and Signe Ratso, Deputy Director-General for Research and Innovation at the European Commission. 

The event will culminate with a high-level debate on how the SusChem community can leverage the strength of the innovation ecosystem to boost research and innovation in Europe and deliver real socio-economic impact through the next European Research Framework Programme (Horizon Europe). 

SusChem Chairman Dr. Markus Steilemann said:

“SusChem welcomes the room given to industry in the first proposal of Horizon Europe and calls for continued support for Key Enabling Technologies (KETs) as drivers of innovation. Especially advanced materials and processes enhanced by digitalisation technologies and combined with new business models are considered key areas for investment and growth. SusChem can and will substantially contribute to this development. We believe that sustainable chemistry and its innovation ecosystem in Europe – consisting of businesses of all sizes, academia and associations – can  thrive well in the Open Science and Open Innovation Pillars of Horizon Europe.”

What’s happening?

In the morning, the event will kick off with the plenary presentations from Steilemann and Ratso, followed by two parallel breakout sessions on future research and innovation priorities for SusChem and Horizon Europe, including discussions on potential missions. The two sessions will cover:

• Creating the future with advanced materials: What are your priorities?
• Creating the future with advanced process technologies: What are your priorities?

Both sessions will also deal with the question of how emerging digital technologies can be integrated to enhance impact in these areas. 

In preparation for Horizon Europe, SusChem presented its position on the role of Key Enabling Technologies in a white paper outlining the major technology developments and initiatives needed to create advanced materials, develop advanced process technologies and leverage them by the implementation of digital technologies.

Innovation ecosystem

In the afternoon, the participants will hear from the SusChem National Technology Platform (NTP) network on their successful stakeholder engagement strategies and we will welcome three new NTPs (Bulgaria, Finland & Sweden). A high-level panel discussion will follow on how to leverage the strength of the innovation ecosystem to boost research and innovation in Europe, especially in the context of KETs and Horizon Europe.

The panel will be moderated by Cefic Director General Marco Mensink and will feature contributions from Peter Dröll, Director Industrial Technologies at DG RTD, Prof. Ferdi Schüth, Vice-President of the Max-Planck-Society, Kateřina Šebková, Director of the Stockholm Regional Centre for Central and Eastern Europe, Martin Stephan, Deputy CEO of CARBIOS, and Olaf Wachsen, Head of Group Process Technology, Clariant.

#suschem2018 takes place at the Thon Hotel City Centre, Brussels, Belgium on 20 June. A full programme for the event is available here.